With repeated exposure to water and moisture over time the tiles may start to fracture. If your shower grout appears damaged or growthy, recoloring may rejuvenate your tiles and safeguard your shower from water harm. This simple DIY project improves both the looks and durability of your bathroom. This tutorial explains how to regrout a shower wall step by step.
Step 1: Gather Your Materials
Before you begin, you will need to gather the necessary tools and materials for the job:
A tool for removing grout such as a grout saw or rotary tool.
Choose the best type of grout suitable for your tiles.
Grout float
Sponge
Bucket of water
Grout sealer
Grout bag (optional)
Vacuum cleaner or brush
Safety gear (gloves, goggles)
Step 2: Remove the Old Grout
The initial and longest exercise involves the extraction of previous grout found between the tiles. Go for either a manual grout saw or a rotary tool that suits you best. A compact grout saw possesses a serrated edge and efficiently scrapes the grout. A rotary tool delivers quicker and better results for extensive surfaces.
To remove the tile grout:
Set the blade of your grout scraper next to the grout line.
Calmly slide or trace the tool along the grout retaining the tiled edges.
Break the space into pieces to remove all the grout from the tiles.
Remove the loose grout dust while working.
Step 3: Clean the Area
After you remove all the previous grout you need to clean the space to get rid of any leftover dust or debris. Squeeze a cloth and pass it over tiles and grout to remove any particles that would weaken the new grout. Check that the room has dried completely and then proceed to the following action.
Step 4: Mix the New Grout
Act on the suggestions offered by the manufacturer as you combine the grout. If selected premixed grout avoid this action altogether. To mix the powder grout in a clean bucket add the suggested water first then blend in the powder as you stir.
There are two types of grout you can use for your shower walls: sanded grout and the non-sanded type. For thin grout lines smaller than 1/8 inch it is advisable to opt for unsanded grout.
Step 5: Apply the New Grout
Once your grout is ready, it’s time to apply it to the shower wall:
Apply the grout with either a float or a bag. When a float is your choice distribute some grout onto it then apply firmly into the tile spaces at a 45-degree angle.
Smoothly cover the tiles with grout to reach every area in between them.
Using the float in a cross motion will eliminate the extra grout from the tiles.
When you have a grout bag apply the grout directly into the gaps and then smooth it with the float.
Step 6: Clean the Tiles
Once the grout is ready apply it 10-15 minutes later for it to begin setting. Then dip a gently damp sponge and rotate it over the tiles to clean off the extra grout residue. Make sure to minimize pressure or you risk losing the grout from the joints.
Have the girl soak the sponge in clear water to guarantee each tile absorbs and removes all dirt. At this stage a very slight haze is typical. Later on this haze can be scratched away.
Step 7: Allow the Grout to Set
Let the grout dry according to what the manufacturer says. This often needs 24 to 48 hours. Do not use the shower until the grout has cured completely.
Step 8: Seal the Grout
After the grout completely dries use a grout sealer to guard it from water and stains. Sweep all grout lines away completely using a small brush or applicator.
For shower walls it is vital to place grout sealer as it stops water from reaching the grout and causing harm or mold. Do not use the shower until the sealer has completely dried.
Resurfacing the shower wall is an easy at-home project that can change the appearance of your bathroom and prolong the lifespan of your tiles. Taking these steps allows you to replace the old grout and secure your shower from moisture and fungus. To ensure your grout lasts for years ahead you must regularly seal it and maintain it properly.
For More Info Click Here: Regrouting tiles